Nowadays the PC or laptop mostly comes without CD/DVD drive. In this case, an USB flash drive or USB hard drive is the best way to boot Clonezilla live. You can follow the following to make a bootable Clonezilla live USB flash drive or hard drive using either:MS Windows
GNU/Linux
MacOS
Requirements:Microsoft Windows 7/8/10, GNU/Linux or MacOS.
Internet access for downloading a distribution to install, or a pre-downloaded ISO file.
A USB flash drive or USB hard drive has the MBR (msdos) partition table and a free partition. If you want to create a bootable USB flash drive/hard drive only for uEFI boot mode, it can be either GPT (recommended) or MBR (msdos) format.
.clonezilla_footer width: 320px; height: 100px; @media(min-width: 500px) .clonezilla_footer width: 468px; height: 60px; @media(min-width: 800px) .clonezilla_footer width: 728px; height: 90px; (adsbygoogle = window.adsbygoogle []).push();USB setup with MS Windows Depends on the boot mode for the machine you want to boot with the USB flash drive, choose one of the following methods to setup Clonezilla Live on your USB flash drive using MS Windows:
2. Next, run the following wget command to download the UNetbootin Linux binary (unetbootin-linux64-702.bin). The UNetbootin Linux binary can be found on the official website, available for both 32-bit and 64-bit architectures.
UNetbootin Free Download – Get Into PC
The lazy ones can buy a module from the manufacturer of these machines. But spending 40 bucks for a pretty lame linux with almost no features? No way! We are hackers, if a manufacturer can do this, we can do this even better. All we've got to do is to erase the 128 MB card in our card reader and get a new operating system on it.So remove the card (turn off the thinclient, if it's still running...) and put it into your card reader in your Linux or Windows PC. If your're lucky you can format it without any problems. In my case Murphy's law hit me once again and my computer didn't let me format the card. Give up and buy the manufacturer's card? Don't even think about this "option". Try to get a digital camera which uses the same type of memory cards. In my case this was my Sony Alpha DSLR. I put the card in, used the "Format card" option from the menu and there was no longer a problem.Put the card back again in your PC card reader, start Unetbootin (if not done before, download it from here: ), select the Damn Small Linux image (get it from here: ) and select the target device. This is the compact flash card in your reader, which can be shown as a drive letter (Windows) or a device (Linux). After a short time you'll get a message that the copy process is completed. Quit the tool, remove the card from your reader and put it back again in your thinclient.
Furthermore, Linux is ridiculously customizable. It's free to download and install (although developers welcome donations). You can throw just about any Linux distribution on a USB stick and test drive it without installing it to your computer. It's also far more attractive than it used to be, rivaling if not exceeding the user interfaces of Windows 10 or MacOS.
Step 1: Open your browser and visit the official website of UNetbootin (unetbootin.github.io). On the home page, you will get the download button for various operating systems, including Windows, Linux and macOS.
The Media Creation Tool can can be used to just download the ISO image of Windows 10, which can then be used with something like Rufus to create the bootable USB drive. This offers the advantage of being able to keep a backup of the ISO image, as well as create multiple boot drives without having to download the image each time. If you run into problems with the Media Creation Tool when it comes to creating the bootable flash drive, you can use the following method.
This was mentioned previously in the Windows 10 section, but if you are creating a USB boot drive for Windows 10 and your 64GB drive is only showing 32GB available, then you need to recreate your boot drive with Rufus. The Media Creation Tool (MCT) only supports drives up to 32GB, and anything larger will have a second partition made, which Windows can not detect normally (but is still available if you plug it into a Linux machine for example). So download the ISO with MCT, then flash it with Rufus.
Once you have your partition set up, you will need to purchase Windows 10, download the ISO file then create a bootable copy. Creating a bootable copy of Windows 10 on Linux can be done using the free Unetbootin (USB thumb drive) or Brasero software if you are installing from a DVD.
Run the unetbootin installer. choose your parted magic iso and choose frugal install. Install it to your windows partition (normally C:) when it tells you it's done you can reboot. When you reboot into your unetbootin installation you should be able to choose to load Parted Magic entirely into RAM. This means that, once running, it will not actually be using the hard disk at all - leaving you free to resize the partitions.
Reboot into Windows. Unetbootin may prompt you to remove the installation. If not running the unetbootin installer again should remove it. (If neither happens then control panel and add/remove programs on XP or Programs and features on vista/7 and remove it there).
ESET SysRescue Live is a free utility that you can use to restore your computer if it is damaged by malware or other threats. If you are experiencing a persistent malware issue, you can boot from a "rescue disk" that you have created directly into ESET SysRescue Live and use the utility to scan and clean your system. 2ff7e9595c
Comments